ComfyUI Node
CyberMOSS Sampler
A ComfyUI node in CyberMOSS with 21 inputs and 1 output.
CyberMOSS Sampler
- model
- positive
- latent_image
- negative
- vae
- latent
◄seed0►
◄presetturbo►
◄steps8►
◄samplereuler►
◄cfg1.0►
◄skip_layers►
◄restart_frac0.25►
◄sigma_r0.65►
◄plungetrue►
◄detail0.50►
◄eta01.00►
◄sigma_gate0.10►
◄contraction0.70►
◄schedule_modecybermoss►
◄denoise1.00►
◄preview_methoddefault►
CategoryCyberMOSS
Inputs (21)
| Name | Type | Default | Description |
|---|---|---|---|
| model | MODEL | — | |
| positive | CONDITIONING | — | |
| latent_image | LATENT | — | |
| seed | INT | 00–18446744073709550000 | — |
| preset | COMBO | turbo | turbo: 8-step models at CFG 1 (SFT Turbo, DMD LoRA). full: Base, SFT and fine-tunes at CFG 3. full_reference follows the official MOSS scheduler; turbo_reference uses the simple shift-5 schedule. |
| steps | INT | 81–100 | Filled by the preset; may be adjusted manually. |
| sampler | COMBO | euler | Euler or AB2 history. euler_2m needs consecutive deterministic steps; use eta0=0 to enable it throughout each descent. |
| cfg | FLOAT | 1.00–20 | Constant CFG. 1 for Turbo/DMD models (negative not evaluated). 3 is the official value for full models; 3-6 for short prompts. |
| skip_layers | STRING | Layers skipped in the negative (uncond) pass, e.g. '22' or '22, 24, 26'. Only active when cfg is not 1. Empty disables it. | |
| restart_frac | FLOAT | 0.250–0.6 | Fraction of the existing step budget used by the restart. Only active with cybermoss schedule and denoise=1. Skipped when the budget is too small or sigma_r=0. |
| sigma_r | FLOAT | 0.650–1 | Restart sigma. Filled by the preset; may be adjusted manually. |
| plunge | BOOLEAN | true | Direct end step from sigma 0.75. Meant for few-step models; only active with cybermoss schedule and denoise=1. |
| detail | FLOAT | 0.500–1 | Detail amount. Filled by the preset; may be adjusted manually. |
| eta0 | FLOAT | 1.000–2 | Ancestral noise strength. |
| sigma_gate | FLOAT | 0.100–1 | Eta is disabled at or below this sigma. Gates below 0.35 ramp to full strength at 0.35; higher gates use a hard cutoff. |
| contraction | FLOAT | 0.700–1 | Scales only the initial noise: 1 leaves it unchanged, 0 removes it. Restart and ancestral noise are separate. |
| schedule_mode | COMBO | cybermoss | reference uses the official MOSS training grid at denoise 1; simple uses the continuous shift-5 grid for Turbo/DMD. Both ignore restart/plunge and use continuous tails below denoise 1. Other manual controls still apply. |
| denoise | FLOAT | 1.000–1 | 1 generates from noise; below 1 refines an existing latent without restart/plunge. 0 passes it through unchanged. Preserved when switching presets. |
| preview_method | COMBO | default | Live preview during sampling. default follows ComfyUI's global setting; auto uses ComfyUI's automatic selection. taesd requires taef2_decoder in models/vae_approx and falls back to latent2rgb. |
| negativeopt | CONDITIONING | Negative conditioning, used when cfg is not 1. MOSS-Image's reference uses an empty negative prompt. Required for the full presets. | |
| vaeopt | VAE | Optional. Fully decodes only the first image for a thumbnail on this node. The LATENT output is unchanged. |
Outputs (1)
| Name | Type | Description |
|---|---|---|
| latent | LATENT | — |